1995-2011 Ford Ranger Manual Brake Conversion Kit

Description

THE SUPERIOR MANUAL BRAKE CONVERSION KIT
Doesn't Your Ranger / B-Series Deserve the Best?
*FREE SHIPPING*
plus
*NEXT DAY SHIPPING*
plus
*DELIVERY IN 2 TO 3 DAYS*
1995-2011 Second Generation Ford Ranger Manual Brake Conversion Kit
**NOTE:  This kit will require drilling a 9/16" hole in the firewall and a 35/64" hole in the brake pedal to be installed correctly.  Please contact me for additional details about the install
This Ranger manual brake conversion kits comes with:
6061-T6 ALUMINUM adapter plate w/ master cylinder spacer plate
Matching Rubber Firewall Gasket - Keeps the engine bay sealed from the cars interior.
Stainless Steel Mounting Hardware - NO rusty bolts or nuts
Adjustable Pushrod Assembly - Engineered to work with and function correctly in second generation Ranger / B-Series trucks.
24mm Bore Master Cylinder - Smaller bore master cylinders creates higher fluid pressure and reduces effort by the driver.
Detailed (5 Page) Installation Manual
Benefits:
6.4 to 1 Pedal Ratio - Creates less effort by the driver to stop the car and multiplies the fluid pressure in the system.  No other manual brake conversion kit can match this.
Dual Bolt Patter on the Adapter Plate - Use GM, Ford, or MOPAR master cylinders.  No other manual brake conversion kit can do this.
Better pedal modulation for consistent braking - No low engine vacuum issues to worry about.
Uses your original brake light switch at no extra cost - No additional parts or money needed to install a brake light switch.
The adapter plate is CNC machined by a water jet from rigid 1/8” thick aluminum with dimensions that covers up the hole in the firewall after you remove the power booster. This modification will clean up your firewall by getting rid of the big, bulky power booster.  Racers do this swap when their engine does not make enough vacuum to operate the power booster, to shed a few pound to make their car lighter, or to clean up the engine bay.
The pro-touring fans use manual brakes to get a better “feel” of their brakes when heading into a corner at a high rate of speed.
The adapter plate can also be polished up to a mirror finish if needed.
Remember:
Higher Pedal Ratio = Less Leg Effort = Increased Braking Performance
Smaller Bore Master Cylinder = Higher Fluid Pressure = Increased Braking Performance
Kit comes with a gasket matched to the adapter plate to seal the passenger compartment from the engine bay.  The other kits do not offer a gasket in their kits.
Kit comes with a dual bolt pattern to run different master cylinders from GM, Ford, and MOPAR.  The other manual brakes kits do not have this feature.
Kit comes with the correct size master cylinder that is matched to the size of the front and rear brakes.  The other manual brake kits offer a larger bore master cylinder which generates less brake line pressure.
Parts to Enhance Your Manua
l Brakes on Y
our Ranger Truck
:
New Rubber or Stainless Steel Flexible Brakes Lines (front and rear) - Old rubber lines will "balloon" causing loss of pressure within the braking system.
PLEASE ask any questions before you buy.  I will be happy to answer any of your questions.